Set up your AquaSense 2 Ultra

1. Charge it. First fit the two side brushes: hook one end of each brush onto its hub, wrap it round and clip the other end on, then check both spin freely. Push the bracket into the back of the dock until it clicks, plug the dock in and sit the robot on it. Solid green means it's full. A full charge takes about 4.5 hours.
2. Get the app and an account. Download the Beatbot app from the App Store or Google Play, create an account with your email, and sign in.
3. Pair it by Bluetooth. Turn on Bluetooth and location on your phone and tap Add Device in the app. On the AquaSense 2 Ultra, hold the Power and Floor buttons together for 3 seconds until the light flashes blue, then pick it from the list. Keep your phone within 1 metre. If it doesn't show, scan the QR code on the robot or add it manually.
4. Connect it to your WiFi. Choose your home network and enter the password. The AquaSense 2 Ultra works on 2.4 GHz or 5 GHz WiFi, so either band is fine.
5. Put it in the pool. Have an AquaRefine Kit (sold separately)? Load it first: open the kit cover, take the cap and foil off the kit, push it in until it clicks and close the cover, then hold the Floor button for 3 seconds to switch dispensing on (the light turns purple). Clear out toys and towels and turn your pool pump off for the best result. Choose a cleaning mode in the app, then set the robot on flat ground for about 5 seconds so it can calibrate. Put it in the water and it starts by itself.

Watch: how to set up the AquaSense 2 Ultra